Barad'Dun The Western Tower

HomeHome  RegisterRegister  WebpageWebpage  Log inLog in  

Share | 

 Max gain Fiberglass poles.

Go down 


Posts : 3563
Join date : 2009-03-10
Age : 54
Location : Las Vegas/Henderson

PostSubject: Max gain Fiberglass poles.   Wed Feb 24, 2010 7:57 am

These are 1/2" or 3/4" hollow fiberglass poles (round) and are light and strong and great for blues and minimum reds. Isk over in ATD is putting together and order for these. If anyone wants some, get on over to ATD's forum and place the order. He will bring them down with him during Fool's raid. Do not stiff our ATD friends, if you order, make sure you have the money to pay him when he brings them down.

Here is what I've lifted from their forum.

Quote :
I'm putting this back up, now that we have a board again.

Some of us would like to get more hollow fiberglass cores for blues, min reds and javs from Max Gain Systems. This core material is my favorite out of everything we have tried in terms of balanced weight/flex/strength. Right now I know we want to get at least one 68" jav core of the 3/4", another three 32" x 1/2" blue cores and another two 48" x 3/4" min red cores. If anyone else wants a long jav, this is THE order to get in on.

The tubes must be purchased in 8' lengths, but they will cut them down for us (to save shipping) for a minimal fee. Shipping cost will be dictated primarily by the length of the box and the 68" core is as long as we can get by with before it's really heinous. With one 68" core shipping should be about $25, unless we get more than 30lbs of stuff.
An 8' tube of 1/2" costs $6.50 (so ~$2.16 per 32" blue core)
An 8' tube of 3/4" costs $9 (so ~$4.50 per 48" min-red core or $9 per 68" jav with a really stiff 28" core as a bonus)
We'll split the shipping evenly by inches ordered across everyone's purchases.

Who wants in? You Vegas guys are welcome to hop on this and we'll bring it down at Fool's Raid. Just don't back out on me once it's ordered

Quote :
Order Date

We haven't picked a date for the order yet. Really, the big push for this order comes from wanting to remake a couple of our long javs out of the 3/4" tube. We have the supplies we need otherwise. If anybody over there does want in, I think some of our guys would be interested in buying a rod together (one 8' x 1/2" makes 3 blues after all). As soon as there are 4 or so of us to split the shipping up, we'll place the order.

The ATD forum is here

Back to top Go down
Max gain Fiberglass poles.
Back to top 
Page 1 of 1
 Similar topics
» Low gain VTA board voltages
» Anyone goood with making things from fiberglass?
» Low Gain Board Tube Option Question
» Converting Classic Hi Gain to Lo Gain
» 1/4 Panel Lower Fiberglass/Steel Patch Panels

Permissions in this forum:You cannot reply to topics in this forum
Barad'Dun The Western Tower :: - The Armory --
Jump to: